Installation Guide

System Requirements

Important: Ensure your system meets these requirements before installation.
Component Minimum Requirements Recommended
Operating System Windows 7 (32/64-bit) Windows 10/11 (64-bit)
Processor Intel Core i3 or equivalent Intel Core i5 or better
RAM 4 GB 8 GB or more
Storage 500 MB free space 1 GB free space
USB Ports USB 2.0 USB 3.0

Installation Steps

1 Download the Software

Visit our Download page and get the latest version of UnlockTool Pro.

Tip: Always download from our official website to avoid malware.
2 Install the Application

Run the installer as Administrator and follow the on-screen instructions.

Choose your preferred installation directory when prompted.

Warning: Disable your antivirus temporarily during installation if it flags the software.
3 Install USB Drivers

After installation, open UnlockTool and go to Drivers → Install All Drivers.

This will install necessary USB drivers for various device brands.

License Activation

1 Purchase a License

Visit our Pricing page and choose a license that fits your needs.

After payment, you'll receive an activation code via email.

2 Activate Your License

Open UnlockTool Pro and click on the License tab.

Enter your activation code and click Activate.

Note: You need an active internet connection for activation.
3 Check License Status

After activation, you can check your license status in the License tab.

It will show your license type, expiration date, and remaining credits.

Samsung Device Operations

Factory Reset FRP Remove Read Info Flash
1 Preparing Samsung Device

For most Samsung operations, you need to boot the device into Download Mode:

  • Power off the device completely
  • Press and hold Volume Down + Home + Power buttons simultaneously
  • When warning screen appears, press Volume Up to continue
Note: For devices without home button, use Volume Down + Bixby + Power.
2 Connecting to UnlockTool

In UnlockTool, select Samsung from the brand list.

Choose your device model and the operation you want to perform.

Connect your device in Download Mode via USB cable.

Important: Use original USB cable for stable connection.
3 Performing Operations

Click the operation button (e.g., "Remove FRP", "Factory Reset") and wait for completion.

The tool will show progress and final result.

MediaTek Operations

Read Info Remove FRP Remove Pattern Requires Auth
1 BROM Mode Connection

For MediaTek devices, you need to connect in BROM mode:

  • Power off the device completely
  • Remove and reinsert the battery (if removable)
  • Press and hold Volume Down or Volume Up (varies by model)
  • Connect USB cable while holding the button

Qualcomm Operations

EDL Mode Read Info Factory Reset Advanced
1 EDL Mode Connection

For Qualcomm devices, use EDL (Emergency Download) mode:

  • Power off the device
  • Press and hold specific key combination (varies by model)
  • Common combinations: Volume Up + Volume Down + Power
  • Device should be detected as Qualcomm HS-USB QDLoader 9008

Troubleshooting Common Issues

1 Device Not Detected
  • Try a different USB cable
  • Use USB 2.0 port instead of USB 3.0
  • Reinstall USB drivers from UnlockTool
  • Check if device is in correct mode (Download/BROM/EDL)
2 Operation Failed
  • Ensure you're using the latest UnlockTool version
  • Check if your license has sufficient credits
  • Verify device model compatibility
  • Try different USB port on your computer
3 Software Crashes
  • Run as Administrator
  • Add UnlockTool to antivirus exceptions
  • Update .NET Framework to latest version
  • Reinstall the application